Installing a patio door roller shades is a project that anyone can carry out, even if the blind has to be cut to fit. If you can use a screwdriver and open a hole with a drill, you’re ready to start. Buy the blind. Buy a blind that fits the door or one that is slightly larger. Make a line to mark the level. Hold the blind in the place you want to install it. Ask someone else to see if you are in the correct position. Make a line to mark exactly where you will place the blind; the ideal position is 4-5 cm above the door. If at sight you are not sure that the blind placed straight, use a level. Mark the position of the holes for the screws using the supports, at the same time you are placing the blind in the correct position.
Install the brackets for install patio door roller shades. Verify that each support is on the correct side; usually each side is different (one of them has the rope to roll up the blind). And then to make sure you are on the right side, read the instructions that come with the shutter.
12 Picture Gallery: Ideas for Install Patio Door Roller Shades
Then for install patio door roller shades, drill the holes to insert the screws of the brackets. Then place dowels (if you need them) and screw the brackets. If you are installing the shutter on a wall with wooden supports, you can directly screw the supports (start the hole with a punch), you will only need plugs if you are installing the blind on a brick or masonry wall.
This post topic: Patio Door