French Patio Doors Outswing Popular Choice
French Patio Doors Outswing – A French door has glass panels inside the wooden frames. Two French doors are often use for access to a patio, as they tend to look nicer than sliding glass doors and can provide more security. If the space inside your house is limited, you can install doors overrun. These doors open onto the patio instead of the room. The installation process is essentially the same as putting on the doors that open.
This project may be easier through the use of preassembled doors. These are french patio doors outswing that are already in a frame. Check the threshold of the door frame to make sure it is level. Use one level. If the threshold is not level, nail wedges the threshold until a level reading is obtain. Place a strip of aluminum tape with adhesive backing across the sill. So that it covers the front edge of the sill and the front of the upper edge of the sill.
Use a piece of tape long enough to cover the 2-inch bottom of the side jambs, as well as the threshold. Place the second strip of aluminum tape on the threshold and jambs behind the first strip, overlapping the edges of the first strip. Apply two coarse, zigzag grains of silicone adhesive on top of the threshold. This helps to provide a waterproof barrier below the french patio doors outswing.